Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise. To install these bearings, tighten the single screw on the collar around its inner ring on your shaft for a mar-free hold.
Coated with nickel, the steel rings on these bearings won’t corrode from water and harsh cleaners, similar to 304 stainless steel. The inner ring is extended for added shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.
Inner Ring
Retaining Ring
Radial Load
Capacity, lbs.
For Shaft
Dia. For
Housing ID Wd. OD OD
Tolerance Wd. OD Thick. Dynamic Static Max.
Speed, rpm Lubrication Temp.
Range, °F ABEC
Rating Each
Sealed
Nickel-Coated Steel Ring
3/4" 1.85" 5/8" 1.625" Not Rated 1.28125" 2.0625" 0.04688" 2,600 1,400 3,100 Lubricated -20° to 220° ABEC-1 7177N11 $180.33
1" 2.047" 3/4" 1.21875" Not Rated 1.4375" 2.26563" 0.04688" 2,800 1,650 2,700 Lubricated -20° to 220° ABEC-1 7177N12 173.60
1 3/16" 2.441" 7/8" 2.15625" Not Rated 1.5625" 2.65625" 0.0625" 4,350 2,550 2,300 Lubricated -20° to 220° ABEC-1 7177N14 260.12
1 1/4" 2.835" 15/16" 2.53125" Not Rated 1.75" 3.07813" 0.0625" 5,750 3,450 2,000 Lubricated -20° to 220° ABEC-1 7177N16 283.91
25mm 52mm 19.1mm 46.8mm Not Rated 36.5mm 57.5mm 1.2mm 2,800 1,650 2,700 Lubricated -20° to 220° ABEC-1 7177N26 201.59
35mm 72mm 23.8mm 64.3mm Not Rated 44.5mm 78.2mm 1.6mm 5,750 16,300 2,000 Lubricated -20° to 220° ABEC-1 7177N28 324.00
40mm 80mm 27.8mm 71.8mm Not Rated 50.8mm 86.5mm 1.6mm 7,300 4,450 1,750 Lubricated -20° to 220° ABEC-1 7177N29 356.98
