Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels. Bearings swivel to accommodate up to 5° of shaft misalignment. Shields keep out dust and contaminants. Not for use in plastic panels.
Radial Load
Cap., lbs.
For Shaft
Dia. For Min. Sheet
Metal Thick. Wd. Spline OD Ring
Material Dynamic Static Max.
Speed, rpm Lubrication Misalignment
Capability Temp.
Range, °F ABEC
Rating Each
Shielded
3/16" 0.06" 0.283" 0.69" Steel 120 60 40,000 Lubricated 5° -30° to 250° ABEC-3 1437N12 $15.86
1/4" 0.06" 0.283" 0.69" Steel 120 60 40,000 Lubricated 5° -30° to 250° ABEC-3 1437N13 16.36
5/16" 0.06" 0.283" 0.69" Steel 120 60 40,000 Lubricated 5° -30° to 250° ABEC-3 1437N14 17.03
3/8" 0.074" 0.37" 1" Steel 380 180 36,000 Lubricated 5° -30° to 250° ABEC-3 1437N15 19.06
6mm 1.5mm 7.188mm 17.5mm Steel 120 60 40,000 Lubricated 5° -30° to 250° ABEC-3 1437N23 15.99
8mm 1.5mm 7.188mm 17.5mm Steel 120 60 40,000 Lubricated 5° -30° to 250° ABEC-3 1437N24 14.70
10mm 1.9mm 9.398mm 25.4mm Steel 380 180 36,000 Lubricated 5° -30° to 250° ABEC-3 1437N25 32.66
