Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment. The outlet for inline connection and two of the 1/4 NPT outlets are regulated and will all have the same set pressure. The third 1/4 NPT outlet is unregulated for use with high-pressure applications, such as with a compressed air gun. Cover the 1/4 NPT outlets with the included threaded plugs when not in use. All outlets are filtered.

Manifolds have an integral slow-start valve that slowly increases pressure to your system to prevent surge damage. They also have a shut-off valve with padlock and key. A filter removes particles and a regulator allows you to adjust and maintain the pressure of your compressed air. Regulator is relieving style so the regulated outlets exhaust when the downstream pressure exceeds the set pressure. Housing meets IP65 for protection from dust and water spray.

Manifolds that operate on 24V DC have LEDs that indicate if the pressure is above or below your set pressure and if the air supply is on or off. They are ATEX Certified for use in hazardous locations.