Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator. Each regulator has two regulated outlets, one unregulated outlet, and an additional port that can be used for a pressure gauge (not included). Regulators are relieving style, so they exhaust when the downstream pressure exceeds the set pressure. Install in your air line after filters.
Joiner clamps (sold separately) connect manifold regulators to each other and other Wilkerson modular components with the same series number. They come with mounting brackets to attach the regulator to a wall or equipment.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Overall
Joiner Clamps
End Block Sets
Manufacturer
Series Inlet Pipe
Size Outlet Pipe Size (No. of Outlets) Max. Flow Rate Max.
Pressure, psi Wd. Ht. Max.
Temp., °F Choose a Pressure Regulating Range, psi Each Each Each
Aluminum Housing
Series No. 09—NPT Female Inlet and Outlets
R09 1/4 1/4 (1 Unregulated),
1/8 (2 Regulated)
29 scfm @ 100 psi 300 1 5/8" 4" 150°
0-30,
0-60,
0-125
4927K12 $37.00 60115K21 $8.38 60115K25 $20.76
Series No. 19—NPT Female Inlet and Outlets
R19 1/4 1/4 (1 Unregulated),
1/4 (2 Regulated)
62 scfm @ 100 psi 300 2 3/8" 5 1/2" 150°
0-30,
0-60,
0-125,
0-250
4927K31 55.09 60115K22 16.73 60115K7 18.05
R19 3/8 3/8 (1 Unregulated),
1/4 (2 Regulated)
62 scfm @ 100 psi 300 2 3/8" 5 1/2" 150°
0-30,
0-60,
0-125,
0-250
4927K32 51.98 60115K22 16.73 60115K26 18.05
R19 1/2 1/2 (1 Unregulated),
1/4 (2 Regulated)
62 scfm @ 100 psi 300 2 3/8" 5 1/2" 150°
0-30,
0-60,
0-125,
0-250
4927K33 51.98 60115K22 16.73 60115K27 18.05