搜索
苏州一点通供应链管理有限公司
欧美原装进口备件，铸造工业自动化集成商
新闻动态
NEWS
mcmaster-carr五金紧固件Panel-Mount Dry-Running Sleeve Bearings
来源: Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts. They’re often used in areas with tight space restrictions. Install them into sheet metal panels with an air-powered or hydraulic press. They’re not for use in plastic panels. These bearings are self-aligning to compensate for small amounts of shaft misalignment. Made of acetal plastic, they won’t warp or swell when exposed to water, so they’re good for use in washdown environments. | 作者:mcmaster-carr五金紧固件销售代理商服务 | 发布时间: 2022-12-29 | 176 次浏览 | 分享到:

Length Spline OD For Minimum Sheet

Metal Thickness Dynamic Radial

Load Capacity Misalignment

Capability Temperature

Range, °F Each

Acetal Plastic Bearings

For 3/16" Shaft Diameter

0.4" 0.55" 0.051" 38 lbs. @ 120 rpm 5° -40° to 180° 3967N11 $10.35

For 1/4" Shaft Diameter

0.4" 0.55" 0.051" 38 lbs. @ 120 rpm 5° -40° to 180° 3967N12 7.42

For 5/16" Shaft Diameter

0.39" 0.67" 0.041" 37 lbs. @ 120 rpm 5° -40° to 180° 3967N13 10.20

For 3/8" Shaft Diameter

0.45" 0.67" 0.054" 42 lbs. @ 120 rpm 5° -40° to 180° 3967N14 7.95

For 1/2" Shaft Diameter

0.65" 0.87" 0.054" 60 lbs. @ 120 rpm 5° -40° to 180° 3967N15 10.15

For 5/8" Shaft Diameter

0.77" 1.11" 0.058" 145 lbs. @ 60 rpm 5° -40° to 180° 3967N16 14.75

For 3/4" Shaft Diameter

0.9" 1.3" 0.058" 170 lbs. @ 60 rpm 5° -40° to 180° 3967N17 29.05

Metric Acetal Plastic Bearings

For 6mm Shaft Diameter

10.2mm 14mm 1.3mm 38 lbs. @ 120 rpm 5° -40° to 180° 3967N18 7.36

For 8mm Shaft Diameter

11.5mm 17.1mm 1.3mm 43 lbs. @ 120 rpm 5° -40° to 180° 3967N19 9.70

For 10mm Shaft Diameter

11.4mm 17.1mm 1.3mm 42 lbs. @ 120 rpm 5° -40° to 180° 3967N21 8.30