Made from 18-8 stainless steel, these blind rivets create a strong hold even in wet and damp areas. The domed head gives your project a finished appearance.

Use these blind rivets to fasten hinges, shelves, or other assemblies where you can only access one side. You can also use them to join materials that are difficult to weld or solder. The back of the rivet deforms during installation, so it creates a permanent hold that won't loosen from vibration. It also means you can't overtighten or strip them.

To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material. For more information on installing rivets, see About Installing Blind Rivets.

Blind rivets that meet ISO 15983 (formerly DIN 7337) comply with international standards for blind rivet dimensions. Those that meet IFI 114 comply with industry standards.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Inch

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head Ht. Shear

Strength, lbs. Tensile

Strength, lbs. Specifications Met Pkg.

Qty. Pkg.

3/32" Dia.

0.032"-0.125" 0.25" 0.097"-0.1" No. 41 0.198" 0.032" 230 280 IFI 114 Standards 100 97525A300 $13.32

0.126"-0.25" 0.375" 0.097"-0.1" No. 41 0.198" 0.032" 230 280 IFI 114 Standards 100 97525A305 11.93

1/8" Dia.

0.032"-0.062" 0.212" 0.129"-0.133" No. 30 0.262" 0.04" 420 530 IFI 114 Standards 100 97525A410 10.10

0.063"-0.125" 0.25" 0.129"-0.133" No. 30 0.262" 0.036" 420 530 IFI 114 Standards 100 97525A415 11.10

0.126"-0.187" 0.313" 0.129"-0.133" No. 30 0.262" 0.036" 420 530 IFI 114 Standards 100 97525A420 12.11

0.188"-0.25" 0.4" 0.129"-0.133" No. 30 0.262" 0.04" 420 530 IFI 114 Standards 100 97525A425 10.63

0.251"-0.312" 0.462" 0.129"-0.133" No. 30 0.262" 0.04" 420 530 IFI 114 Standards 100 97525A430 11.39

0.313"-0.375" 0.5" 0.129"-0.133" No. 30 0.262" 0.036" 420 530 IFI 114 Standards 100 97525A435 14.03

0.376"-0.5" 0.65" 0.129"-0.133" No. 30 0.262" 0.04" 420 530 IFI 114 Standards 50 97525A440 8.69

0.501"-0.625" 0.775" 0.129"-0.133" No. 30 0.262" 0.04" 420 530 IFI 114 Standards 50 97525A442 11.68

5/32" Dia.

0.063"-0.125" 0.275" 0.16"-0.164" No. 20 0.328" 0.043" 650 820 IFI 114 Standards 100 97525A455 17.04

0.126"-0.187" 0.362" 0.16"-0.164" No. 20 0.328" 0.05" 650 820 IFI 114 Standards 50 97525A458 6.81

0.188"-0.25" 0.4" 0.16"-0.164" No. 20 0.328" 0.043" 650 820 IFI 114 Standards 50 97525A465 9.69

0.251"-0.375" 0.525" 0.16"-0.164" No. 20 0.328" 0.043" 650 820 IFI 114 Standards 50 97525A470 12.20

0.376"-0.5" 0.675" 0.16"-0.164" No. 20 0.328" 0.05" 650 820 IFI 114 Standards 50 97525A473 13.74

3/16" Dia.

0.063"-0.125" 0.3" 0.192"-0.196" No. 11 0.394" 0.051" 950 1,200 IFI 114 Standards 50 97525A485 13.41

0.126"-0.25" 0.425" 0.192"-0.196" No. 11 0.394" 0.051" 950 1,200 IFI 114 Standards 50 97525A490 14.50

0.251"-0.375" 0.55" 0.192"-0.196" No. 11 0.394" 0.051" 950 1,200 IFI 114 Standards 50 97525A505 16.89

0.376"-0.5" 0.7" 0.192"-0.196" No. 11 0.394" 0.063" 950 1,200 IFI 114 Standards 50 97525A510 13.42

0.501"-0.625" 0.825" 0.192"-0.196" No. 11 0.394" 0.063" 950 1,200 IFI 114 Standards 25 97525A515 11.01

0.626"-0.75" 0.95" 0.192"-0.196" No. 11 0.394" 0.063" 950 1,200 IFI 114 Standards 25 97525A520 11.63

0.751"-0.875" 1.075" 0.192"-0.196" No. 11 0.375" 0.053" 950 1,200 IFI 114 Standards 25 97525A522 11.22

0.876"-1" 1.2" 0.192"-0.196" No. 11 0.375" 0.053" 950 1,200 IFI 114 Standards 25 97525A115 17.59

1/4" Dia.

0.063"-0.25" 0.5" 0.257"-0.261" F 0.525" 0.08" 1,700 2,100 IFI 114 Standards 10 97525A550 5.22

0.251"-0.375" 0.625" 0.257"-0.261" F 0.525" 0.08" 1,700 2,100 IFI 114 Standards 10 97525A553 7.55

0.376"-0.5" 0.75" 0.257"-0.261" F 0.525" 0.08" 1,700 2,100 IFI 114 Standards 10 97525A556 7.71

0.501"-0.625" 0.875" 0.257"-0.261" F 0.525" 0.08" 1,700 2,100 IFI 114 Standards 5 97525A568 9.73

0.626"-0.75" 1" 0.257"-0.261" F 0.525" 0.08" 1,700 2,100 IFI 114 Standards 5 97525A570 11.07

0.876"-1" 1.25" 0.257"-0.261" F 0.525" 0.08" 1,700 2,100 IFI 114 Standards 5 97525A572 8.89

Metric

For Material

Thick., mm Lg.,

mm For Hole

Size, mm For Drill Bit

Size, mm Head

Dia., mm Head

Ht., mm Shear

Strength, lbs. Tensile

Strength, lbs. Specifications Met Pkg.

Qty. Pkg.

3mm Dia.

1-3 6 3.1-3.2 3 6.5 0.8 350 440 DIN 7337, ISO 15983 50 97525A211 $10.85

3-5 8 3.1-3.2 3 6.5 0.8 350 440 DIN 7337, ISO 15983 50 97525A212 12.86

5.5-7 10 3.1-3.2 3 6.5 0.8 350 440 DIN 7337, ISO 15983 25 97525A213 7.71

7-9 12 3.1-3.2 3 6.5 0.8 350 440 DIN 7337, ISO 15983 25 97525A214 7.72

9-11 14 3.1-3.2 3 6.5 0.8 350 440 DIN 7337, ISO 15983 10 97525A215 14.27

11-13 16 3.1-3.2 3 6.5 0.8 350 440 DIN 7337, ISO 15983 25 97525A216 11.43

3.2mm Dia.

1-3 6 3.3-3.4 3.2 6.5 0.8 400 510 DIN 7337, ISO 15983 25 97525A217 7.85

3-5 8 3.3-3.4 3.2 6.5 0.8 400 510 DIN 7337, ISO 15983 25 97525A218 7.86

5.5-7 10 3.3-3.4 3.2 6.5 0.8 400 510 DIN 7337, ISO 15983 25 97525A219 8.57

7-9 12 3.3-3.4 3.2 6.5 0.8 400 510 DIN 7337, ISO 15983 25 97525A221 12.57

9-11 14 3.3-3.4 3.2 6.5 0.8 400 510 DIN 7337, ISO 15983 25 97525A222 13.72

11-13 16 3.3-3.4 3.2 6.5 0.8 400 510 DIN 7337, ISO 15983 10 97525A223 8.00

4mm Dia.

1-2.5 6 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 25 97525A224 11.43

2.5-4.5 8 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 25 97525A251 12.00

4.5-6.5 10 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 25 97525A226 9.43

6.5-8.5 12 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 25 97525A227 10.28

8.5-10.5 14 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 10 97525A228 6.57

8.5-12 16 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 25 97525A229 14.29

12-16 20 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 10 97525A231 6.29

16-21 25 4.1-4.2 4 8 1 560 780 DIN 7337, ISO 15983 10 97525A232 10.85

4.8mm Dia.

2-4 8 4.9-5 4.8 9.5 1.1 850 1,010 DIN 7337, ISO 15983 10 97525A233 6.86

4-6 10 4.9-5 4.8 9.5 1.1 850 1,010 DIN 7337, ISO 15983 25 97525A234 14.00

6-8 12 4.9-5 4.8 9.5 1.1 850 1,010 DIN 7337, ISO 15983 10 97525A235 6.57

8-10 14 4.9-5 4.8 9.5 1.1 850 1,010 DIN 7337, ISO 15983 25 97525A236 14.00

8-11 16 4.9-5 4.8 9.5 1.1 850 1,010 DIN 7337, ISO 15983 10 97525A237 6.57

11-15 20 4.9-5 4.8 9.5 1.1 850 1,010 DIN 7337, ISO 15983 10 97525A238 8.57

5mm Dia.

2-4 8 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 10 97525A239 6.28

4-6 10 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 10 97525A241 6.57

6-8 12 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 10 97525A242 8.29

8-10 14 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 10 97525A243 8.57

8-11 16 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 10 97525A244 8.86

11-15 20 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 10 97525A245 11.43

15-20 25 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 10 97525A246 12.57

20-25 30 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 5 97525A247 9.43

25-30 35 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 5 97525A248 10.86

30-35 40 5.1-5.2 5 9.5 1.1 940 1,120 DIN 7337, ISO 15983 1 97525A249 3.57