Use these valves with manual and electric pumps to dispense different amounts of oil from multiple lubrication points. They have a check valve to prevent backward flow. To connect to tubing, use a compression nut and sleeve (sold separately).

Flow rate trade number indicates the relative amount of oil each valve delivers. For each increase in trade size, the amount of oil delivered approximately doubles. For example, 0 delivers twice the amount of oil that 00 delivers. In a system with two lubrication points, the lubrication point connected to 0 will receive 2/3 of the oil dispensed, and the lubrication point connected to 00 will receive 1/3 of the oil dispensed. In general, valves with lower relative flow rates are better for cycling systems; valves with higher relative flow rates are better for continuous recirculation systems.

Oil Outlet

Oil Inlet

Thread

Type Pipe

Size Thread

Size Gender Thread

Type Pipe

Size Thread

Size Gender Max. Oil Outlet

Pressure, psi Lg. Hex

Wd., mm Material Temp.

Range, °F Choose a Flow

Rate Trade Number Each

NPT 1/8 __ Male NPT 1/8 __ Male 200 1" 10 Brass 32° to 120°

00,0,1,2,3,4,5

2293K13 $17.78

NPT 1/8 __ Male UNF __ 5/16"-24 Male 200 1" 10 Brass 32° to 120°

00,0,1,2,3,4,5

2293K12 17.78

UNF __ 5/16"-24 Male UNF __ 5/16"-24 Male 200 1" 10 Brass 32° to 120°

00,0,1,2,3,4,5

2293K11 17.78

Optional Sleeve for Metal 5/32" OD Tube 2293K4 Each $1.31

Optional Compression Nut for 5/16"-24 UNF Connections 2293K3 Each 2.73

Optional Sleeve for Nylon 5/32" OD Tube 2293K5 Each 2.73