mcmaster-carr原装进口High-Strength Corrosion-Resistant Double-Pitch ANSI Roller Chain and Links
This treated steel chain has over six times the capacity of stainless steel chain. Designed for long drives and low- to moderate-speed applications, its links are twice as long as those found on other roller chain. Use with standard sprockets with at least 24 teeth.
Trade No. C2060H and C2080H chain have thick side plates to handle double the working loads of standard chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding links are also known as roller links. They require two connecting links to join chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
Chain
Connecting
Links
Adding Links
Adding-and-Connecting
Links
Roller Chain
Trade No. Pitch Roller
Dia. Roller
Wd. Working
Load, lbs. Lengths, ft. Per
Ft. Each Each Each
Single Strand
Corrosion-Resistant-Coated Steel
C2040 1" 0.312" 5/16" 600 1-20, 50, 100 1060N1 $8.58 1060N511 $1.98 1060N513 $1.85 1060N512 $3.92
C2050 1 1/4" 0.400" 3/8" 1,000 1-20, 50, 100 1060N2 11.32 1060N521 2.60 1060N523 2.98 1060N522 4.75
C2060H 1 1/2" 0.469" 1/2" 1,400 1-20, 50, 100 1060N3 19.44 1060N531 3.96 1060N533 4.73 1060N532 7.74
C2080H 2" 0.625" 5/8" 2,400 1-20, 50, 100 1060N4 29.76 1060N541 6.63 1060N543 10.94 1060N542 12.77
