Replacement O-Rings

O-Rings in all available materials for both body and stud seals.

Replacement Studs

Studs for all available materials and barb sizes.

Polyurethane Tubing

Polyurethane tubing is recommended for use with our barbed fittings. It provides excellent flexibility and resistance to kinking.

Overview

Description: Ultra miniature, adjustable position street tee fitting, with 10-32 external thread, and built-in reducing barbs, for two tubes or hoses with different inside diameters.

Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure of the tubing.

Features

Brass construction.

Beswick’s trademark O-ring seal design provides a leak-tight joint.

Beswick’s proprietary single edged “line contact” barb allows tubing to be pushed onto the fitting easily by hand, while still providing exceptional holding power. It also insures a leak tight connection at the tubing interface.

Note: Suggested tube ID is for polyurethane or vinyl tubing. Consult factory if you plan to use a different tubing material.