O-Rings in all available materials for both body and stud seals.

Replacement Studs

Studs for all available materials.

Polyurethane Tubing

Polyurethane tubing is recommended for use with our barbed fittings. It provides excellent flexibility and resistance to kinking.

Overview

Description: Ultra miniature, adjustable position elbow fitting, with 10-32 thread, built-in barb. This fitting is similar to the MLAS series, but features a raised hex head stud for installation, rather than a recessed screwdriver slot.

Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure of the tubing.

Features

Brass construction.

Beswick’s trademark O-ring seal design provides a leak-tight joint.

Beswick’s proprietary single edged “line contact” barb allows tubing to be pushed onto the fitting easily by hand, while still providing exceptional holding power. It also insures a leak tight connection at the tubing interface.

Note: Suggested tube ID is for polyurethane or vinyl tubing. Consult factory if you plan to use a different tubing material.