搜索
苏州一点通供应链管理有限公司
欧美原装进口备件，铸造工业自动化集成商
新闻动态
NEWS
mcmaster-carr五金紧固件Ball-Lock Quick-Change Fixture Clamps
来源:Build these components into fixture plates, machine subplates, and tombstones for quick changes. The system clamps and locates at the same time for accurate positioning with repeatability of ±0.0005". Components are compatible with Jergens Ball-Lock, Carr-Lane Carr Lock, and Kurt PinLock quick change systems. For accurate positioning, at least two sets of clamps, liners, and receivers are required. Install the receivers in the base plate and the liners in the fixture plate. Then line up the two plates, insert the clamps, and tighten their screws to secure the fixture in place. If more holding capacity is needed, use additional clamps and receivers but omit liners to prevent the clamp from getting stuck in the fixture plate. Push receiver plugs into unused receivers to prevent chips and coolant from accumulating during machining. When installed, plugs sit flush with the surface of the fixture plate. To remove, thread a screw into the tapped hole in the center and pull up. | 作者:mcmaster-carr五金紧固件销售代理商服务 | 发布时间: 2022-12-29 | 243 次浏览 | 🔊 点击朗读正文 ❚❚ ▶ | 分享到:


Clamp

Shank

Head

For Fixture

Plate Thick. Dia.,

mm Lg. Dia. Thick. Hex Key

Size For Fixture Plate

Thick. Tolerance Holding

Capacity, lbs. Material Includes Each

1/2" 13 1.08" 7/8" 1/4" 3/32" -0.005" to 0.005" 625 Black-Oxide Steel Hex Key, Set Screw 1349N41 $112.73

1/2" 16 1.15" 1 1/2" 5/16" 1/8" -0.005" to 0.005" 800 Black-Oxide Steel Hex Key, Set Screw 1349N11 114.98

3/4" 13 1.33" 7/8" 1/4" 3/32" -0.005" to 0.005" 625 Black-Oxide Steel Hex Key, Set Screw 1349N42 113.81

3/4" 16 1.40" 1 1/2" 5/16" 1/8" -0.005" to 0.005" 800 Black-Oxide Steel Hex Key, Set Screw 1349N43 113.82

3/4" 20 1.53" 1 3/4" 3/8" 1/8" -0.005" to 0.005" 2,250 Black-Oxide Steel Hex Key, Set Screw 1349N12 107.73

3/4" 25 1.70" 2" 3/8" 5/32" -0.005" to 0.005" 5,440 Black-Oxide Steel Hex Key, Set Screw 1349N44 112.73

1" 20 1.78" 1 3/4" 3/8" 1/8" -0.005" to 0.005" 2,250 Black-Oxide Steel Hex Key, Set Screw 1349N45 106.79

1" 25 1.95" 2" 3/8" 5/32" -0.005" to 0.005" 5,400 Black-Oxide Steel Hex Key, Set Screw 1349N13 114.98

1" 30 2.13" 2 1/4" 1/2" 3/16" -0.005" to 0.005" 8,000 Black-Oxide Steel Hex Key, Set Screw 1349N46 130.27

1" 35 2.22" 2 1/4" 1/2" 1/4" -0.005" to 0.005" 11,780 Black-Oxide Steel Hex Key, Set Screw 1349N47 140.39

1" 50 2.70" 3" 3/4" 3/8" -0.005" to 0.005" 15,200 Black-Oxide Steel Hex Key, Set Screw 1349N48 215.11

1 1/2" 35 2.72" 2 1/4" 1/2" 1/4" -0.005" to 0.005" 11,780 Black-Oxide Steel Hex Key, Set Screw 1349N49 150.59

1 1/2" 50 3.20" 3" 3/4" 3/8" -0.005" to 0.005" 15,200 Black-Oxide Steel Hex Key, Set Screw 1349N51 238.59

2" 35 3.22" 2 1/4" 1/2" 1/4" -0.005" to 0.005" 11,780 Black-Oxide Steel Hex Key, Set Screw 1349N52 160.36

2" 50 3.70" 3" 3/4" 3/8" -0.005" to 0.005" 15,200 Black-Oxide Steel Hex Key, Set Screw 1349N53 246.43

Hole Liners


Hole Liner

For Fixture

Plate Thick. For Clamp Shank

Dia., mm OD OD Tolerance

Range For Fixture Plate

Thick. Tolerance Material Each

1/2" 13 0.7518" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N54 $18.73

1/2" 16 1.0018" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N33 19.10

3/4" 13 0.7518" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N55 19.99

3/4" 16 1.0018" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N56 19.99

3/4" 20 1.3772" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N34 20.37

3/4" 25 1.3772" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N57 19.99

1" 20 1.3772" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N58 23.13

1" 25 1.3772" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N35 23.59

1" 30 1.7523" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N59 32.09

1" 35 1.7523" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N61 32.09

1" 50 2.5025" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N62 65.00

1 1/2" 35 1.7523" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N63 33.76

1 1/2" 50 2.5025" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N64 71.19

2" 35 1.7523" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N65 38.27

2" 50 2.5025" -0.0004" to 0" -0.005" to 0.005" Black-Oxide Steel 1349N66 76.64

Receiver Plugs


Receiver Plug

Thread

For Clamp Shank

Dia., mm Lg.,

mm Size Pitch,

mm Material Each

13 8 M4 0.7 Aluminum 1349N72 $9.10

16 8 M4 0.7 Aluminum 1349N73 9.84

20 8 M4 0.7 Aluminum 1349N74 11.04

25 10 M4 0.7 Aluminum 1349N75 11.54

30 11 M4 0.7 Aluminum 1349N76 12.36

35 14 M6 1 Aluminum 1349N77 15.77

50 17 M6 1 Aluminum 1349N78 28.19

Receiver Bushings


Receiver Bushing

For Min. Base

Plate Thick. For Clamp Shank

Dia., mm OD Bolt Circle

Dia. OD Tolerance

Range Material Number of

Mounting Holes Mounting

Fasteners Included Each

3/4" 13 1.3750" 0.984" -0.0004" to 0" Black-Oxide Steel 3 Yes 1349N67 $70.16

3/4" 16 1.4370" 1.125" -0.0004" to 0" Black-Oxide Steel 3 Yes 1349N26 71.57

1" 20 1.6873" 1.362" -0.0004" to 0" Black-Oxide Steel 3 Yes 1349N27 69.94

1 1/4" 25 2.0623" 1.644" -0.0004" to 0" Black-Oxide Steel 3 Yes 1349N28 74.10

1 3/8" 30 2.2654" 1.876" -0.0004" to 0" Black-Oxide Steel 3 Yes 1349N68 77.66

1 1/2" 35 2.6873" 2.178" -0.0004" to 0" Black-Oxide Steel 3 Yes 1349N69 85.86

2" 50 3.4998" 2.916" -0.0004" to 0" Black-Oxide Steel 3 Yes 1349N71 112.44