With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise. Startup friction produces a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

For

Housing ID Lg. Shell

Lg. Dynamic Radial

Load Capacity Lubrication Lubricant 温度

范围， °F 每个

841轴承青铜轴承，钢壳和氯丁橡胶垫

适用于3/8"轴直径。

1" 1" 7/8" 750 磅。@ 120 转 润滑 SAE 30 机油 0° 至 220° 6364K31 11.82 美元

适用于1/2"轴直径。

1" 1" 7/8" 1,000 磅。@ 120 转 润滑 SAE 30 机油 0° 至 220° 6364K32 10.33

适用于5/8"轴直径。

1 1/4" 1 1/4" 1 1/8" 1,550 磅。@ 60 转 润滑 SAE 30 机油 0° 至 220° 6364K33 14.57

适用于3/4"轴直径。

1 1/4" 1 1/4" 1 1/8" 1,850 磅。@ 60 转 润滑 SAE 30 机油 0° 至 220° 6364K34 13.18

适用于1"轴直径。

1 5/8 " 1 1/2 " 1 3/8 " 3,000 磅。@ 60 转 润滑 SAE 30 机油 0° 至 220° 6364K36 20.28

841 轴承青铜轴承，带 304 不锈钢外壳和硅橡胶垫

适用于1/4"轴直径。

9/16 " 3/4 " 3/4 " 1,150 磅。@ 120 转 润滑 SAE 20 机油 -35° 至 300° 6364K41 54.05

适用于3/8"轴直径。

7/8 " 5/8 " 5/8 " 990 磅。@ 120 转 润滑 SAE 20 机油 -35° 至 300° 6364K45 40.42

适用于1/2"轴直径。

1" 5/8 " 5/8 " 990 磅。@ 120 转 润滑 SAE 20 机油 -35° 至 300° 6364K44 81.32

适用于5/8"轴直径。

1" 3/4 " 3/4 " 2,350 磅。@ 60 转 润滑 SAE 20 机油 -35° 至 300° 6364K46 62.45

适用于1"轴直径。

1 1/2 " 1 1/2 " 1 1/2 " 4,750 磅。@ 60 转 润滑 SAE 20 机油 -35° 至 300° 6364K47 102.25

For 1 1/8" Shaft Dia.

1 5/8" 1 1/2" 1 1/2" 9,550 lbs. @ 30 rpm Lubricated SAE 20 Oil -35° to 300° 6364K42 112.04

For 1 1/4" Shaft Dia.

1 3/4" 1 1/2" 1 1/2" 9,550 lbs. @ 30 rpm Lubricated SAE 20 Oil -35° to 300° 6364K43 233.08

For 10mm Shaft Dia.

20mm 25mm 25mm 1,550 lbs. @ 120 rpm Lubricated SAE 20 Oil -35° to 300° 6364K48 134.96

For 12mm Shaft Dia.

25mm 25mm 25mm 1,550 lbs. @ 120 rpm Lubricated SAE 20 Oil -35° to 300° 6364K49 148.58

For 14mm Shaft Dia.

28mm 25mm 25mm 3,100 lbs. @ 60 rpm Lubricated SAE 20 Oil -35° to 300° 6364K51 149.04

For 16mm Shaft Dia.

28mm 25mm 25mm 3,100 lbs. @ 60 rpm Lubricated SAE 20 Oil -35° to 300° 6364K52 158.96

For 20mm Shaft Dia.

30mm 30mm 30mm 7,500 lbs. @ 30 rpm Lubricated SAE 20 Oil -35° to 300° 6364K53 217.96

For 25mm Shaft Dia.

36mm 30mm 30mm 7,500 lbs. @ 30 rpm Lubricated SAE 20 Oil -35° to 300° 6364K54 246.08