Lightweight and nonmagnetic, these rivets have good corrosion resistance. They can grip a wider range of material thicknesses than standard high-strength rivets. Install in countersunk holes and the angled head sits flush with the material's surface. The mandrel expands the rivet body to completely fill the hole, providing the highest shear and tensile strengths of all the blind rivets we offer. The portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.

The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.

A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head

Ht. Shear

Strength, lbs. Tensile

Strength, lbs. Countersink

Angle Specifications Met Pkg.

Qty. Pkg.

3/16" Dia.

0.125"-0.331" 0.49" 0.191"-0.201" No. 11 0.35" 0.08" 550 450 100° IFI 134 Standards 10 98778A354 $6.03

0.305"-0.5" 0.66" 0.191"-0.201" No. 11 0.35" 0.08" 550 450 100° IFI 134 Standards 25 98778A361 11.23

1/4" Dia.

0.16"-0.437" 0.665" 0.261"-0.272" I 0.41" 0.09" 1,270 830 100° IFI 134 Standards 10 98778A362 7.60

0.415"-0.725" 0.915" 0.261"-0.272" I 0.41" 0.09" 1,270 830 100° IFI 134 Standards 5 98778A363 5.86