Install these rivets in countersunk holes and the angled head sits flush with the material's surface. The body deforms to seal the bottom of the rivet and prevent water and air from passing through. They provide higher shear and tensile strengths than standard blind rivets and the portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Made of aluminum, rivets are lightweight, nonmagnetic, and have good corrosion resistance. Use to join material when you only have access to one side.

The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.

A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head Ht. Countersink

Angle Shear

Strength, lbs. Tensile

Strength, lbs. Material Specifications Met Pkg.

Qty. Pkg.

Steel Mandrel

1/8" Dia.

0.063"-0.125" 0.341" 0.129"-0.133" No. 30 0.245" 0.055" 120° 300 380 5056 Aluminum IFI 126 Standards 100 97524A050 $12.08

0.126"-0.187" 0.402" 0.129"-0.133" No. 30 0.245" 0.055" 120° 300 380 5056 Aluminum IFI 126 Standards 100 97524A055 12.70

0.188"-0.25" 0.466" 0.129"-0.133" No. 30 0.245" 0.055" 120° 300 380 5056 Aluminum IFI 114 Standards 100 97524A172 12.25

0.251"-0.312" 0.582" 0.129"-0.133" No. 30 0.245" 0.055" 120° 240 280 5056 Aluminum IFI 114 Standards 50 97524A162 6.03

5/32" Dia.

0.126"-0.187" 0.432" 0.16"-0.164" No. 20 0.327" 0.055" 120° 430 600 5056 Aluminum IFI 126 Standards 50 97524A060 10.08

0.188"-0.312" 0.612" 0.16"-0.164" No. 20 0.327" 0.055" 120° 240 280 5056 Aluminum IFI 114 Standards 50 97524A163 8.34

3/16" Dia.

0.126"-0.25" 0.52" 0.192"-0.196" No. 11 0.395" 0.065" 120° 570 840 5056 Aluminum IFI 126 Standards 50 97524A065 11.60

0.251"-0.375" 0.645" 0.192"-0.196" No. 11 0.395" 0.065" 120° 570 840 5056 Aluminum IFI 126 Standards 50 97524A070 12.41