Installed

For a flush finish on both sides of the material, install these rivets in countersunk holes. No portion of the mandrel is left behind after installation, creating a through-hole. They have a zinc-plated finish that provides mild corrosion resistance. Use to fasten material when you only have access to one side.

The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.

A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head Ht. Countersink

Angle Shear

Strength, lbs. Tensile

Strength, lbs. Material Pkg.

Qty. Pkg.

1/8" Dia.

0.059"-0.079" 0.091" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A100 $12.54

0.079"-0.098" 0.11" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A200 12.94

0.098"-0.118" 0.13" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A300 13.26

0.118"-0.138" 0.15" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A400 13.78

0.138"-0.157" 0.169" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A600 13.92

0.157"-0.177" 0.189" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A700 14.55

0.177"-0.197" 0.209" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A800 14.81

0.197"-0.217" 0.228" 0.129"-0.134" No. 29 0.216" 0.039" 120° 180 150 Zinc-Plated Steel 50 95372A900 19.04