18-8 stainless steel has good corrosion resistance and may be mildly magnetic. These rivets have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.

The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.

A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head Ht. Shear

Strength, lbs. Tensile

Strength, lbs. Specifications Met Pkg.

Qty. Pkg.

1/8" Dia.

0.063"-0.125" 0.25" 0.129"-0.133" No. 30 0.39" 0.046" 420 530 IFI 114 Standards 100 97525A615 $16.83

0.126"-0.187" 0.313" 0.129"-0.133" No. 30 0.39" 0.046" 420 530 IFI 114 Standards 100 97525A620 16.85

0.188"-0.25" 0.375" 0.129"-0.133" No. 30 0.39" 0.046" 420 530 IFI 114 Standards 100 97525A625 16.57

0.251"-0.312" 0.462" 0.129"-0.133" No. 30 0.375" 0.065" 420 530 IFI 114 Standards 50 97525A101 11.77

0.313"-0.375" 0.525" 0.129"-0.133" No. 30 0.39" 0.065" 420 530 IFI 114 Standards 50 97525A627 10.35

0.376"-0.5" 0.65" 0.129"-0.133" No. 30 0.375" 0.065" 420 530 IFI 114 Standards 25 97525A102 7.79

5/32" Dia.

0.02"-0.125" 0.3" 0.16"-0.164" No. 20 0.468" 0.075" 650 820 IFI 114 Standards 50 97525A690 9.44

0.126"-0.187" 0.362" 0.16"-0.164" No. 20 0.468" 0.075" 650 820 IFI 114 Standards 50 97525A940 9.07

0.188"-0.25" 0.425" 0.16"-0.164" No. 20 0.468" 0.075" 650 820 IFI 114 Standards 50 97525A691 10.09

0.251"-0.375" 0.55" 0.16"-0.164" No. 20 0.468" 0.075" 650 820 IFI 114 Standards 50 97525A692 10.58

0.376"-0.5" 0.675" 0.16"-0.164" No. 20 0.468" 0.075" 650 820 IFI 114 Standards 50 97525A950 10.77

3/16" Dia.

0.02"-0.125" 0.325" 0.192"-0.196" No. 11 0.65" 0.092" 950 1,200 IFI 114 Standards 50 97525A693 8.15

0.126"-0.25" 0.45" 0.192"-0.196" No. 11 0.65" 0.075" 950 1,200 IFI 114 Standards 25 97525A635 4.27

0.251"-0.375" 0.575" 0.192"-0.196" No. 11 0.65" 0.092" 950 1,200 IFI 114 Standards 25 97525A640 9.28

0.376"-0.5" 0.7" 0.192"-0.196" No. 11 0.65" 0.092" 950 1,200 IFI 114 Standards 25 97525A645 11.58

0.501"-0.625" 0.825" 0.192"-0.196" No. 11 0.65" 0.092" 950 1,200 IFI 114 Standards 25 97525A650 13.94

0.626"-0.75" 0.95" 0.192"-0.196" No. 11 0.65" 0.092" 950 1,200 IFI 114 Standards 10 97525A655 5.95

0.751"-0.875" 1.075" 0.192"-0.196" No. 11 0.625" 0.092" 950 1,200 IFI 114 Standards 10 97525A116 8.90

0.876"-1" 1.2" 0.192"-0.196" No. 11 0.65" 0.092" 950 1,200 IFI 114 Standards 10 97525A658 6.78