Lightweight and corrosion resistant, these blind rivets are made of aluminum. Install them in countersunk holes, and their angled head sits flush with the material’s surface.

They're often used to fasten material together when you only have access to one side, such as when attaching hinges and shelves. You can also use them to join materials that are difficult to weld or solder. The back of the rivet deforms during installation, creating a permanent hold that resists vibration without the chance of overtightening and stripping.

To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material. For more information on installing rivets, see About Installing Blind Rivets.

Blind rivets that meet ISO 15978 (formerly DIN 7337) comply with international dimensional standards for blind rivets. Those that meet IFI 114 comply with industry standards.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Inch—Aluminum Mandrel

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head Ht. Countersink

Angle Shear

Strength, lbs. Tensile

Strength, lbs. Specifications Met Pkg.

Qty. Pkg.

3/32" Dia.

0.062"-0.125" 0.225" 0.097"-0.1" No. 41 0.174" 0.039" 120° 80 130 IFI 114 Standards 100 97447A167 $9.40

1/8" Dia.

0.092"-0.125" 0.275" 0.129"-0.133" No. 30 0.233" 0.031" 120° 120 150 IFI 114 Standards 250 97447A210 11.25

0.126"-0.187" 0.337" 0.129"-0.133" No. 30 0.233" 0.031" 120° 120 150 IFI 114 Standards 250 97447A215 12.39

0.188"-0.25" 0.4" 0.129"-0.133" No. 30 0.233" 0.031" 120° 120 150 IFI 114 Standards 250 97447A220 10.55

0.251"-0.312" 0.462" 0.129"-0.133" No. 30 0.233" 0.031" 120° 120 150 IFI 114 Standards 100 97447A711 18.52

0.313"-0.375" 0.525" 0.129"-0.133" No. 30 0.233" 0.031" 120° 120 150 IFI 114 Standards 100 97447A712 19.50

0.501"-0.625" 0.75" 0.129"-0.133" No. 30 0.22" 0.051" 120° 120 150 IFI 114 Standards 50 97447A168 6.49

5/32" Dia.

0.062"-0.125" 0.275" 0.16"-0.164" No. 20 0.281" 0.063" 120° 220 350 IFI 114 Standards 50 97447A169 8.01

0.126"-0.187" 0.337" 0.16"-0.164" No. 20 0.281" 0.063" 120° 220 350 IFI 114 Standards 50 97447A171 8.70

0.188"-0.25" 0.4" 0.16"-0.164" No. 20 0.281" 0.063" 120° 220 350 IFI 114 Standards 50 97447A172 8.98

0.251"-0.375" 0.55" 0.16"-0.164" No. 20 0.281" 0.063" 120° 220 350 IFI 114 Standards 50 97447A173 9.53

0.376"-0.5" 0.65" 0.16"-0.164" No. 20 0.281" 0.063" 120° 220 350 IFI 114 Standards 50 97447A174 10.09

3/16" Dia.

0.188"-0.25" 0.425" 0.192"-0.196" No. 11 0.348" 0.071" 120° 310 500 IFI 114 Standards 50 97447A230 5.42

0.251"-0.375" 0.55" 0.192"-0.196" No. 11 0.348" 0.071" 120° 310 500 IFI 114 Standards 50 97447A240 6.00

0.376"-0.5" 0.675" 0.192"-0.196" No. 11 0.348" 0.071" 120° 310 500 IFI 114 Standards 25 97447A175 5.39

0.501"-0.625" 0.825" 0.192"-0.196" No. 11 0.348" 0.071" 120° 310 500 IFI 114 Standards 25 97447A176 6.64

0.626"-0.75" 0.925" 0.192"-0.196" No. 11 0.348" 0.071" 120° 310 500 IFI 114 Standards 25 97447A177 7.95

0.751"-0.875" 1.05" 0.192"-0.196" No. 11 0.348" 0.071" 120° 310 500 IFI 114 Standards 25 97447A178 8.29

0.876"-1" 1.175" 0.192"-0.196" No. 11 0.348" 0.071" 120° 310 500 IFI 114 Standards 25 97447A179 8.70

1/4" Dia.

0.188"-0.25" 0.475" 0.257"-0.261" F 0.484" 0.106" 120° 600 750 IFI 114 Standards 10 97447A181 4.64

0.251"-0.375" 0.6" 0.257"-0.261" F 0.484" 0.106" 120° 600 750 IFI 114 Standards 10 97447A182 5.30

Inch—Steel Mandrel

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head Ht. Countersink

Angle Shear

Strength, lbs. Tensile

Strength, lbs. Specifications Met Pkg.

Qty. Pkg.

3/32" Dia.

0.062"-0.125" 0.225" 0.097"-0.1" No. 41 0.174" 0.039" 120° 120 170 IFI 114 Standards 100 97517A195 $10.81

0.126"-0.25" 0.335" 0.097"-0.1" No. 41 0.174" 0.039" 120° 120 170 IFI 114 Standards 100 97517A196 11.77

0.251"-0.375" 0.475" 0.097"-0.1" No. 41 0.174" 0.039" 120° 120 170 IFI 114 Standards 50 97517A197 7.16

1/8" Dia.

0.092"-0.125" 0.275" 0.129"-0.133" No. 30 0.233" 0.031" 120° 170 220 IFI 114 Standards 250 97517A210 10.08

0.126"-0.187" 0.337" 0.129"-0.133" No. 30 0.233" 0.031" 120° 170 220 IFI 114 Standards 250 97517A215 10.40

0.188"-0.25" 0.4" 0.129"-0.133" No. 30 0.233" 0.031" 120° 170 220 IFI 114 Standards 250 97517A220 10.50

0.251"-0.312" 0.438" 0.129"-0.133" No. 30 0.22" 0.051" 120° 170 220 IFI 114 Standards 100 97517A202 8.90

0.313"-0.375" 0.5" 0.129"-0.133" No. 30 0.22" 0.051" 120° 170 220 IFI 114 Standards 100 97517A203 10.18

0.376"-0.5" 0.625" 0.129"-0.133" No. 30 0.22" 0.051" 120° 170 220 IFI 114 Standards 50 97517A204 6.21

5/32" Dia.

0.126"-0.187" 0.337" 0.16"-0.164" No. 20 0.281" 0.063" 120° 340 490 IFI 114 Standards 50 97517A198 10.34

0.188"-0.25" 0.4" 0.16"-0.164" No. 20 0.281" 0.063" 120° 340 490 IFI 114 Standards 50 97517A205 8.75

0.251"-0.375" 0.525" 0.16"-0.164" No. 20 0.281" 0.063" 120° 340 490 IFI 114 Standards 50 97517A206 9.70

3/16" Dia.

0.062"-0.125" 0.3" 0.192"-0.196" No. 11 0.348" 0.071" 120° 380 500 IFI 114 Standards 50 97517A199 6.21

0.188"-0.25" 0.425" 0.192"-0.196" No. 11 0.348" 0.071" 120° 380 500 IFI 114 Standards 50 97517A240 6.45

0.251"-0.375" 0.55" 0.192"-0.196" No. 11 0.348" 0.071" 120° 380 500 IFI 114 Standards 50 97517A250 7.27

Metric—Steel Mandrel

For Material

Thick., mm Lg.,

mm For Hole

Size, mm Head

Dia., mm Head

Ht., mm Countersink

Angle Shear

Strength, lbs. Tensile

Strength, lbs. Specifications Met Pkg.

Qty. Pkg.

3 mm Dia.

1.5-3.5 6 3-3.1 6 0.9 120° 110 80 DIN 7337, ISO 15978 50 90664A101 $7.85

3.5-5.5 8 3-3.1 6 0.9 120° 110 80 DIN 7337, ISO 15978 100 90664A102 12.57

5.5-7 10 3-3.1 6 0.9 120° 110 80 DIN 7337, ISO 15978 100 90664A103 12.57

7-9 12 3-3.1 6 0.9 120° 110 80 DIN 7337, ISO 15978 25 90664A104 7.00

9-13 16 3-3.1 6 0.9 120° 110 80 DIN 7337, ISO 15978 25 90664A105 7.85

4 mm Dia.

1.5-3 6 4-4.1 7.5 1 120° 170 170 DIN 7337, ISO 15978 50 90664A106 7.85

3-5 8 4-4.1 7.5 1 120° 170 170 DIN 7337, ISO 15978 50 90664A107 12.57

5-6.5 10 4-4.1 7.5 1 120° 170 170 DIN 7337, ISO 15978 50 90664A108 12.57

6.5-8.5 12 4-4.1 7.5 1 120° 170 170 DIN 7337, ISO 15978 50 90664A109 9.43

8.5-12.5 16 4-4.1 7.5 1 120° 170 170 DIN 7337, ISO 15978 25 90664A110 6.28

12.5-14.5 18 4-4.1 7.5 1 120° 170 170 DIN 7337, ISO 15978 25 90664A111 7.72

12.5-16.5 20 4-4.1 7.5 1 120° 170 170 DIN 7337, ISO 15978 25 90664A112 12.57

5 mm Dia.

3-4.5 8 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 50 90664A113 12.57

4.5-6 10 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 50 90664A114 11.72

6-8 12 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 50 90664A115 12.57

8-12 16 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 50 90664A116 12.57

10-14 18 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 25 90664A117 11.14

12-16 20 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 25 90664A118 11.14

16-21 25 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 25 90664A119 11.43

21-25 30 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 25 90664A120 12.57

25-30 35 5-5.1 9 1.2 120° 350 290 DIN 7337, ISO 15978 5 90664A121 11.43