Copper rivets are electrically conductive, nonmagnetic, and have good corrosion resistance. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.

The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.

A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

For Material Thick. Lg. For Hole Size For Drill

Bit Size Head

Dia. Head

Ht. Shear

Strength, lbs. Tensile

Strength, lbs. Specifications Met Pkg.

Qty. Pkg.

Brass Mandrel

1/8" Dia.

0.063"-0.125" 0.275" 0.129"-0.133" No. 30 0.25" 0.04" Not Rated Not Rated __ 100 90217A610 $20.94

0.126"-0.187" 0.337" 0.129"-0.133" No. 30 0.25" 0.04" Not Rated Not Rated __ 100 90217A630 21.42

0.188"-0.25" 0.4" 0.129"-0.133" No. 30 0.25" 0.04" Not Rated Not Rated __ 50 90217A640 17.09

0.251"-0.375" 0.525" 0.129"-0.133" No. 30 0.25" 0.04" Not Rated Not Rated __ 50 90217A680 21.15

Steel Mandrel

1/8" Dia.

0.063"-0.125" 0.275" 0.129"-0.133" No. 30 0.262" 0.04" 210 300 IFI 114 Standards 100 90217A010 7.62

0.126"-0.187" 0.337" 0.129"-0.133" No. 30 0.262" 0.04" 210 300 IFI 114 Standards 100 90217A015 11.03

0.188"-0.25" 0.4" 0.129"-0.133" No. 30 0.262" 0.04" 210 300 IFI 114 Standards 100 90217A020 8.38

0.251"-0.375" 0.525" 0.129"-0.133" No. 30 0.262" 0.04" 210 300 IFI 114 Standards 100 90217A025 14.29