Center-knurled pins are often used in place of clevis pins or to create T-handles. The knurled center locks pins in position, while the smooth ends act as a pivot. Because these pins are knurled all the way around, they distribute twisting forces more evenly than grooved pins. The ends are chamfered for easy insertion. Pins are made of steel for good strength. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Lg. Dia. (A) Dia. (A)

Tolerance Dia. (B) Dia. (B) Tolerance Knurl

Lg. Breaking

Strength, lbs. Pkg.

Qty. Pkg.

1215 Carbon Steel

1/8" Dia.

1/2" 0.125" -0.002" to 0" 0.133" -0.002" to 0.002" 1/4" 1,600 5 96008A110 $11.46

3/4" 0.125" -0.002" to 0" 0.133" -0.002" to 0.002" 3/8" 1,600 5 96008A120 11.66

1" 0.125" -0.002" to 0" 0.133" -0.002" to 0.002" 1/2" 1,600 5 96008A130 11.85

3/16" Dia.

1/2" 0.188" -0.002" to 0" 0.198" -0.002" to 0.002" 1/4" 3,300 5 96008A140 11.66

3/4" 0.188" -0.002" to 0" 0.198" -0.002" to 0.002" 3/8" 3,300 5 96008A150 12.14

1" 0.188" -0.002" to 0" 0.198" -0.002" to 0.002" 1/2" 3,300 5 96008A160 12.62

1/4" Dia.

3/4" 0.25" -0.002" to 0" 0.262" -0.002" to 0.002" 3/8" 5,800 5 96008A170 12.24

1" 0.25" -0.002" to 0" 0.262" -0.002" to 0.002" 1/2" 5,800 5 96008A180 12.74

1 1/4" 0.25" -0.002" to 0" 0.262" -0.002" to 0.002" 5/8" 5,800 5 96008A190 13.20