Also known as caulk-in anchors, these stay secure when there's not much material to hold. When installed, the cone expands the sleeve to hold it firmly inside the hole. To install, insert the anchor cone end first and use an installation tool to drive the sleeve over the cone. Then, insert a screw or threaded rod and tighten. Pull-out strength and shear strength values are 25% of the ultimate values.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Anchors

Strength, lbs.

Thread

Size Lg. Min.

Installation Dp. Drill Bit

Size Dia. Sleeve

Material Pull-Out Shear Tested In For Use In Pkg.

Qty. Pkg.

Zinc Alloy

8-32 9/16" 1/2" 5/16" 5/16" Lead 85 85 4,000 psi Concrete Block, Brick, Concrete 25 97041A611 $16.04

10-24 3/4" 5/8" 3/8" 3/8" Lead 230 220 4,000 psi Concrete Block, Brick, Concrete 25 97041A612 13.05

1/4"-20 7/8" 7/8" 1/2" 1/2" Lead 370 350 4,000 psi Concrete Block, Brick, Concrete 25 97041A028 9.78

5/16"-18 1" 1" 5/8" 5/8" Lead 470 500 4,000 psi Concrete Block, Brick, Concrete 10 97041A613 11.91

3/8"-16 1 1/4" 1 1/4" 3/4" 3/4" Lead 600 820 4,000 psi Concrete Block, Brick, Concrete 5 97041A614 9.69

1/2"-13 1 9/16" 1 1/2" 7/8" 7/8" Lead 850 1,100 4,000 psi Concrete Block, Brick, Concrete 5 97041A615 10.18

5/8"-11 1 7/8" 2" 1 1/8" 1 1/8" Lead 970 1,500 4,000 psi Concrete Block, Brick, Concrete 1 97041A717 6.63

3/4"-10 2" 2 1/2" 1 1/4" 1 1/4" Lead 1,400 1,900 4,000 psi Concrete Block, Brick, Concrete 1 97041A719 9.14

Installation Tools

Drive these tools with a hammer to expand anchors.

For Thread

Size Lg. Each

Zinc-Plated Steel

8-32 2 15/16" 97020A111 $4.18

10-24 3 1/4" 97020A112 3.09

1/4"-20 3 3/4" 97020A114 4.47

5/16"-18 4 3/8" 97020A115 6.23

3/8"-16 4 5/8" 97020A121 6.18

1/2"-13 5" 97020A122 10.36

5/8"-11 6 1/2" 97020A123 17.38

3/4"-10 6 1/2" 97020A124 29.25

Adjustable-Depth Installation Tools

An adjustable stop allows you to set anchors at consistent depths. Use with a hammer.

Lg.

For Thread

Size Open Closed Each

Alloy Steel

1/4"-20 2 1/4" 2" 97105A040 $81.46

3/8"-16 2 3/4" 2 1/4" 97105A060 123.03

Quickset Installation Tools

The fastest way to install shallow-hole female-threaded anchors. To use, insert the tip of the tool into the anchor and turn the tool with a power drill.

For Thread

Size Each

Zinc-Plated Steel

10-24 97041A505 $60.90

1/4"-20 97041A520 58.14

3/8"-16 97041A535 87.22