Combine these shafts with a machine key (not included) to transmit torque to gears, sprockets, and other power transmission components. All have an ANSI standard keyway (keys not included; see our selection of key stock). Their edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.

Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. 1045 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. 4140 alloy steel shafts have a higher yield strength than 1045 carbon steel shafts for supporting heavier loads; however, they are more difficult to machine.

Stainless steel shafts are more corrosion resistant than steel shafts but also more difficult to machine. 303 and 304 stainless steel shafts have good corrosion resistance. 303 stainless steel shafts are annealed, which makes them softer than 304 stainless steel shafts but more corrosion resistant.

3D CAD models availableFor technical drawings and 3-D models, click on a part number.

Made to Order—Keyed End × Threaded End

Keyed End × Threaded End

Attach threaded accessories, such as mixer propellers and fan blades, to the end of these shafts.

To Order: Please specify the length of the shaft (in 0.005" or 0.1 mm increments). For the keyed end of the shaft, please specify keyway length (in 0.005" or 0.1 mm increments). For the threaded end of the shaft, please specify thread size, thread length (in 0.005" or 01. mm increments), and step length (in 0.005" or 0.1 mm increments).

Keyed End

Threaded End

Dia. Choose a Lg. Choose a

Keyway Lg. Keyway

Wd. Keyway

Dp. Choose a Thread Size for Threaded End Choose a

Thread Lg. Choose a

Step Lg. Heat

Treatment Each

Inch—1045 Carbon Steel (Brinell 180)

1/4" 3"-36" 0.5"-6" 0.093" 0.046"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28

0.5"-4" 0.5"-18" __ 4953N147 $167.17

3/8" 3"-36" 0.5"-6" 0.093" 0.046"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24

0.5"-4" 0.5"-18" __ 4953N148 169.67

1/2" 3"-36" 0.5"-6" 1/8" 0.062"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20

0.5"-4" 0.5"-18" __ 4953N149 172.92

5/8" 3"-36" 0.5"-6" 0.187" 0.093"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24

0.5"-4" 0.5"-18" __ 4953N151 176.00

3/4" 3"-36" 0.5"-6" 0.187" 0.093"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,3/4"-10,3/4"-16

0.5"-4" 0.5"-18" __ 4953N152 182.50

1" 3"-36" 0.5"-6" 1/4" 1/8"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24,7/8"-9,7/8"-14,1"-8,1"-12,1"-14

0.5"-4" 0.5"-18" __ 4953N153 192.75

1 1/4" 3"-36" 0.5"-6" 1/4" 1/8"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24,7/8"-9,7/8"-14,1"-8,1"-12,1"-14,1 1/4"-7,1 1/4"-12

0.5"-4" 0.5"-18" __ 4953N154 207.00

Inch—4140 Alloy Steel (Brinell 270)

1/2" 3"-36" 0.5"-6" 1/8" 0.062"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20

0.5"-4" 0.5"-18" Hardened 5022N141 200.64

5/8" 3"-36" 0.5"-6" 0.187" 0.093"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24

0.5"-4" 0.5"-18" Hardened 5022N142 204.45

3/4" 3"-36" 0.5"-6" 0.187" 0.093"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,3/4"-10,3/4"-16

0.5"-4" 0.5"-18" Hardened 5022N143 206.82

1" 3"-36" 0.5"-6" 1/4" 1/8"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24,7/8"-9,7/8"-14,1"-8,1"-12,1"-14

0.5"-4" 0.5"-18" Hardened 5022N144 220.55

1 1/4" 3"-36" 0.5"-6" 1/4" 1/8"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24,7/8"-9,7/8"-14,1"-8,1"-12,1"-14,1 1/4"-7,1 1/4"-12

0.5"-4" 0.5"-18" Hardened 5022N145 243.36

Inch—303 Stainless Steel (Brinell 140)

1/4" 3"-36" 0.5"-6" 0.093" 0.046"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28

0.5"-4" 0.5"-18" Annealed 2960N147 187.45

3/8" 3"-36" 0.5"-6" 0.093" 0.046"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24

0.5"-4" 0.5"-18" Annealed 2960N148 194.27

1/2" 3"-36" 0.5"-6" 1/8" 0.062"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20

0.5"-4" 0.5"-18" Annealed 2960N149 204.45

5/8" 3"-36" 0.5"-6" 0.187" 0.093"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24

0.5"-4" 0.5"-18" Annealed 2960N151 217.73

3/4" 3"-36" 0.5"-6" 0.187" 0.093"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,3/4"-10,3/4"-16

0.5"-4" 0.5"-18" Annealed 2960N152 235.27

1" 3"-36" 0.5"-6" 1/4" 1/8"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24,7/8"-9,7/8"-14,1"-8,1"-12,1"-14

0.5"-4" 0.5"-18" Annealed 2960N153 254.33

1 1/4" 3"-36" 0.5"-6" 1/4" 1/8"

6-32,6-40,8-32,8-36,10-24,10-32,12-24,12-28,1/4"-20,1/4"-28,3/8"-16,3/8"-24,1/2"-13,1/2"-20,5/8"-11,5/8"-18,5/8"-24,7/8"-9,7/8"-14,1"-8,1"-12,1"-14,1 1/4"-7,1 1/4"-12

0.5"-4" 0.5"-18" Annealed 2960N154 309.92

Metric—1045 Carbon Steel (Brinell 180)

10mm 75mm-1,000mm 10mm-150mm 3mm 1.5mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M10 × 1.0,M10 × 1.25,M10 × 1.5

10mm-100mm 10mm-500mm __ 4953N155 173.33

12mm 75mm-1,000mm 10mm-150mm 4mm 2mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M12 × 1.25,M12 × 1.5,M12 × 1.75

10mm-100mm 10mm-500mm __ 4953N156 177.50

20mm 75mm-1,000mm 10mm-150mm 6mm 3mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M10 × 1.0,M10 × 1.25,M10 × 1.5,M12 × 1.25,M12 × 1.5,M12 × 1.75,M14 × 1.5,M14 × 2.0,M16 × 1.5,M16 × 2.0,M20 × 1.5,M20 × 2.5

10mm-100mm 10mm-500mm __ 4953N157 185.00

25mm 75mm-1,000mm 10mm-150mm 8mm 4mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M10 × 1.0,M10 × 1.25,M10 × 1.5,M12 × 1.25,M12 × 1.5,M12 × 1.75,M14 × 1.5,M14 × 2.0,M16 × 1.5,M16 × 2.0,M18 × 1.5,M18 × 2.5,M20 × 1.5,M20 × 2.5,M22 × 1.5,M22 × 2.5

10mm-100mm 10mm-500mm __ 4953N158 195.25

Metric—4140 Alloy Steel (Brinell 270)

12mm 75mm-1,000mm 10mm-150mm 4mm 2mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M12 × 1.25,M12 × 1.5,M12 × 1.75

10mm-100mm 10mm-500mm Hardened 5022N146 223.45

20mm 75mm-1,000mm 10mm-150mm 6mm 3mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M10 × 1.0,M10 × 1.25,M10 × 1.5,M12 × 1.25,M12 × 1.5,M12 × 1.75,M14 × 1.5,M14 × 2.0,M16 × 1.5,M16 × 2.0,M20 × 1.5,M20 × 2.5

10mm-100mm 10mm-500mm Hardened 5022N147 208.73

25mm 75mm-1,000mm 10mm-150mm 8mm 4mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M10 × 1.0,M10 × 1.25,M10 × 1.5,M12 × 1.25,M12 × 1.5,M12 × 1.75,M14 × 1.5,M14 × 2.0,M16 × 1.5,M16 × 2.0,M18 × 1.5,M18 × 2.5,M20 × 1.5,M20 × 2.5,M22 × 1.5,M22 × 2.5

10mm-100mm 10mm-500mm Hardened 5022N148 218.73

Metric—303 Stainless Steel (Brinell 140)

10mm 75mm-1,000mm 10mm-150mm 3mm 1.5mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M10 × 1.0,M10 × 1.25,M10 × 1.5

10mm-100mm 10mm-500mm Annealed 2960N155 204.55

12mm 75mm-1,000mm 10mm-150mm 4mm 2mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M12 × 1.25,M12 × 1.5,M12 × 1.75

10mm-100mm 10mm-500mm Annealed 2960N156 208.27

20mm 75mm-1,000mm 10mm-150mm 6mm 3mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M10 × 1.0,M10 × 1.25,M10 × 1.5,M12 × 1.25,M12 × 1.5,M12 × 1.75,M14 × 1.5,M14 × 2.0,M16 × 1.5,M16 × 2.0,M20 × 1.5,M20 × 2.5

10mm-100mm 10mm-500mm Annealed 2960N157 244.73

25mm 75mm-1,000mm 10mm-150mm 8mm 4mm

M4 × 0.7,M4 × 0.75,M5 × 0.5,M5 × 0.8,M6 × 0.75,M6 × 1.0,M8 × 1.0,M8 × 1.25,M10 × 1.0,M10 × 1.25,M10 × 1.5,M12 × 1.25,M12 × 1.5,M12 × 1.75,M14 × 1.5,M14 × 2.0,M16 × 1.5,M16 × 2.0,M18 × 1.5,M18 × 2.5,M20 × 1.5,M20 × 2.5,M22 × 1.5,M22 × 2.5

10mm-100mm 10mm-500mm Annealed 2960N158 254.33

Made to Order—Keyed End × Tapped End

Keyed End × Tapped End

Internal threads allow you to attach threaded components.

To Order: Please specify the length of the shaft (in 0.005" or 0.1 mm increments). For the keyed end of the shaft, please specify keyway length (in 0.005" or 0.1 mm increments). For the tapped end of the shaft, please specify thread size.

Keyed End

Dia. Choose a Lg. Choose a

Keyway Lg. Keyway

Wd. Keyway

Dp. Choose a Thread Size (Thread Lg.) for Tapped End Heat

Treatment Each

Inch—1045 Carbon Steel (Brinell 180)

1/4" 3"-36" 0.5"-6" 0.093" 0.046"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94")

__ 4953N135 $106.25

3/8" 3"-36" 0.5"-6" 0.093" 0.046"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50")

__ 4953N136 108.75

1/2" 3"-36" 0.5"-6" 1/8" 0.062"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75")

__ 4953N137 112.00

5/8" 3"-36" 0.5"-6" 0.187" 0.093"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1")

__ 4953N138 115.08

3/4" 3"-36" 0.5"-6" 0.187" 0.093"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1")

__ 4953N139 121.67

1" 3"-36" 0.5"-6" 1/4" 1/8"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1"),5/8"-11 (1.25"),5/8"-18 (1.25"),5/8"-24 (1.25"),7/8"- 9 (1.75"),7/8"-14 (1.75")

__ 4953N141 131.83

1 1/4" 3"-36" 0.5"-6" 1/4" 1/8"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1"),5/8"-11 (1.25"),5/8"-18 (1.25"),5/8"-24 (1.25"),7/8"- 9 (1.75"),7/8"-14 (1.75"),1"-8 (2"),1"-12 (2"),1"-14 (2")

__ 4953N142 146.08

Inch—4140 Alloy Steel (Brinell 270)

1/2" 3"-36" 0.5"-6" 1/8" 0.062"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75")

Hardened 5022N131 134.55

5/8" 3"-36" 0.5"-6" 0.187" 0.093"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1")

Hardened 5022N132 138.18

3/4" 3"-36" 0.5"-6" 0.187" 0.093"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1")

Hardened 5022N133 140.36

1" 3"-36" 0.5"-6" 1/4" 1/8"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1"),5/8"-11 (1.25"),5/8"-18 (1.25"),5/8"-24 (1.25"),7/8"- 9 (1.75"),7/8"-14 (1.75")

Hardened 5022N134 154.09

1 1/4" 3"-36" 0.5"-6" 1/4" 1/8"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1"),5/8"-11 (1.25"),5/8"-18 (1.25"),5/8"-24 (1.25"),7/8"- 9 (1.75"),7/8"-14 (1.75"),1"-8 (2"),1"-12 (2"),1"-14 (2")

Hardened 5022N135 176.91

Inch—303 Stainless Steel (Brinell 140)

1/4" 3"-36" 0.5"-6" 0.093" 0.046"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94")

Annealed 2960N135 121.00

3/8" 3"-36" 0.5"-6" 0.093" 0.046"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50")

Annealed 2960N136 127.82

1/2" 3"-36" 0.5"-6" 1/8" 0.062"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75")

Annealed 2960N137 138.18

5/8" 3"-36" 0.5"-6" 0.187" 0.093"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1")

Annealed 2960N138 151.27

3/4" 3"-36" 0.5"-6" 0.187" 0.093"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1")

Annealed 2960N139 169.09

1" 3"-36" 0.5"-6" 1/4" 1/8"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1"),5/8"-11 (1.25"),5/8"-18 (1.25"),5/8"-24 (1.25"),7/8"- 9 (1.75"),7/8"-14 (1.75")

Annealed 2960N141 193.42

1 1/4" 3"-36" 0.5"-6" 1/4" 1/8"

6-32 (.28"),6-40 (.28"),8-32 (.33"),8-36 (.33"),10-24 (.38"),10-32 (.38"),12-24 (.94"),12-28 (.94"),1/4"-20 (.50"),1/4"-28 (.50"),3/8"-16 (.75"),3/8"-24 (.75"),1/2"-13 (1"),1/2"-20 (1"),5/8"-11 (1.25"),5/8"-18 (1.25"),5/8"-24 (1.25"),7/8"- 9 (1.75"),7/8"-14 (1.75"),1"-8 (2"),1"-12 (2"),1"-14 (2")

Annealed 2960N142 249.00

Metric—1045 Carbon Steel (Brinell 180)

10mm 75mm-1,000mm 10mm-150mm 3mm 1.5mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm)

__ 4953N143 112.17

12mm 75mm-1,000mm 10mm-150mm 4mm 2mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm)

__ 4953N144 116.58

20mm 75mm-1,000mm 10mm-150mm 6mm 3mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm),M10 × 1.0 (20.000 mm),M10 × 1.25 (20.000 mm),M10 × 1.5 (20.000 mm),M12 × 1.25 (23.880 mm),M12 × 1.50 (23.880 mm),M12 × 1.75 (23.880 mm),M14 × 1.5 (28.000 mm),M14 × 2.0 (28.000 mm),M16 × 1.5 (32.000 mm),M16 × 2.0 (32.000 mm)

__ 4953N145 124.00

25mm 75mm-1,000mm 10mm-150mm 8mm 4mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm),M10 × 1.0 (20.000 mm),M10 × 1.25 (20.000 mm),M10 × 1.5 (20.000 mm),M12 × 1.25 (23.880 mm),M12 × 1.50 (23.880 mm),M12 × 1.75 (23.880 mm),M14 × 1.5 (28.000 mm),M14 × 2.0 (28.000 mm),M16 × 1.5 (32.000 mm),M16 × 2.0 (32.000 mm),M18 × 1.5 (36.000 mm),M18 × 2.5 (36.000 mm),M20 × 1.5 (40.130 mm),M20 × 2.5 (40.130 mm),M22 × 1.5 (44.000 mm),M22 × 2.5 (44.000 mm)

__ 4953N146 134.33

Metric—4140 Alloy Steel (Brinell 270)

12mm 75mm-1,000mm 10mm-150mm 4mm 2mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm)

Hardened 5022N136 157.00

20mm 75mm-1,000mm 10mm-150mm 6mm 3mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm),M10 × 1.0 (20.000 mm),M10 × 1.25 (20.000 mm),M10 × 1.5 (20.000 mm),M12 × 1.25 (23.880 mm),M12 × 1.50 (23.880 mm),M12 × 1.75 (23.880 mm),M14 × 1.5 (28.000 mm),M14 × 2.0 (28.000 mm),M16 × 1.5 (32.000 mm),M16 × 2.0 (32.000 mm)

Hardened 5022N137 142.27

25mm 75mm-1,000mm 10mm-150mm 8mm 4mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm),M10 × 1.0 (20.000 mm),M10 × 1.25 (20.000 mm),M10 × 1.5 (20.000 mm),M12 × 1.25 (23.880 mm),M12 × 1.50 (23.880 mm),M12 × 1.75 (23.880 mm),M14 × 1.5 (28.000 mm),M14 × 2.0 (28.000 mm),M16 × 1.5 (32.000 mm),M16 × 2.0 (32.000 mm),M18 × 1.5 (36.000 mm),M18 × 2.5 (36.000 mm),M20 × 1.5 (40.130 mm),M20 × 2.5 (40.130 mm),M22 × 1.5 (44.000 mm),M22 × 2.5 (44.000 mm)

Hardened 5022N138 152.27

Metric—303 Stainless Steel (Brinell 140)

10mm 75mm-1,000mm 10mm-150mm 3mm 1.5mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm)

Annealed 2960N143 138.00

12mm 75mm-1,000mm 10mm-150mm 4mm 2mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm)

Annealed 2960N144 141.82

20mm 75mm-1,000mm 10mm-150mm 6mm 3mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm),M10 × 1.0 (20.000 mm),M10 × 1.25 (20.000 mm),M10 × 1.5 (20.000 mm),M12 × 1.25 (23.880 mm),M12 × 1.50 (23.880 mm),M12 × 1.75 (23.880 mm),M14 × 1.5 (28.000 mm),M14 × 2.0 (28.000 mm),M16 × 1.5 (32.000 mm),M16 × 2.0 (32.000 mm)

Annealed 2960N145 178.27

25mm 75mm-1,000mm 10mm-150mm 8mm 4mm

M4 × 0.7 (8.130 mm),M4 × 0.75 (8.130 mm),M5 × 0.5 (9.910 mm),M5 × 0.8 (9.910 mm),M6 × 0.75 (11.940 mm),M6 × 1.0 (11.940 mm),M8 × 1.0 (16.000 mm),M8 × 1.25 (16.000 mm),M10 × 1.0 (20.000 mm),M10 × 1.25 (20.000 mm),M10 × 1.5 (20.000 mm),M12 × 1.25 (23.880 mm),M12 × 1.50 (23.880 mm),M12 × 1.75 (23.880 mm),M14 × 1.5 (28.000 mm),M14 × 2.0 (28.000 mm),M16 × 1.5 (32.000 mm),M16 × 2.0 (32.000 mm),M18 × 1.5 (36.000 mm),M18 × 2.5 (36.000 mm),M20 × 1.5 (40.130 mm),M20 × 2.5 (40.130 mm),M22 × 1.5 (44.000 mm),M22 × 2.5 (44.000 mm)

Annealed 2960N146 193.83